Designed for Turn Mill Centers  (measure tools that would otherwise interfere with the probe arm) 

T-Probe Adapter can be rotated in 90 deg increments to have even more options to measure tools collision free.

Picture: Doosan Lynx 2100 LSYB Renishaw

15mm square probe top stylus.

Tolerance <.0005”  

User Instructions:

Fits over existing Renishaw 15mm square probe stylus.

1. Fold down measure probe about 20 to 30 deg (green probe light needs to be off). 

2. Slip T-Probe Adapter gently over the probe (make sure it sits flat) and lightly tighten the nylon thumb screw.

3. Measure tool and subtract Z-1.25" or X-2.5" of the measured tool value.

4. Pull arm back up until green light turns off 20 to 30 Deg from the top.

5. Loosen up thumb screw one turn, gently remove T-Probe Adapter.

6. Pull measuring arm all the way back in covered home position.

T-Probe Adapter  #SPT-TPA

Price $125  

Premium quality with unmatched pricing (Swiss made in the USA)

Collision Free Tool Setting